WiSI Mini RTU™ (Wireless Sensor Interface Remote Terminal Unit)

The WiSI Mini RTU™ is an entirely new approach to SCADA and remote sensing.
(see animation demonstration)

The WiSI Mini RTU is a fully integrated miniature RTU with:

  • Weatherproof fully encapsulated assembly (IP67)
  • Solar panel
  • Embedded transceiver and antenna
  • Transmit indicator LED
  • Single waterproof connector for all I/O
    Typical I/O:
    - 4-12 bit analog (0-5V 0-2∙5V, +/-1∙8V, 4-20 mA, RTD)
    - 4 Digital Inputs
    - 4 Digital Outputs
    - 5V and 12V external power supply (50mA total external load)
    - Optional I/O Configurations.
  1. Slips into any 2” internal diameter pipe or opening and is 100% deployed.
  2. Pass a magnet over the top anytime to verify DS-100 Mini RTU operations.
  3. In addition to normal DS-100 duties, the DS-100 Router (Repeater) and DS-100C Coordinator (PLC or PC Interface) are always on. They require an external solar panel to receive and relay data or alarms at any time.
  4. Deploy in relocatable 2” internal diameter tube anywhere convenient to data collection and control needs.
  5. Units can be positioned higher off the ground for better RF path.
  6. Each DS-100 Mini RTU variation has a unique address, and knows how to route data to the Base Station DS 100-C and HMI for processing, display, return commands, or setpoint changes.
more infoGo ahead and accept the Watch Technology challenge; take delivery, install the system, money back guarantee.
Call now 541-472-8095.


Advantages of the WiSI Mini RTU

  • Very low-cost data collection and control system:  RTU, Repeater, PC/PLC
    Interface = savings of 75% or more over other systems.
  • Completely integrated, instantly deployable, addressable, weatherproof RTUs including processor, radio, embedded antenna, power storage, and waterproof
    I/O connector.
  • Report alarms (data out of user selectable setpoint or on contact closure) as they
    occur, or data on a pre-set or remotely changeable schedule.
  • NEVER needs a battery.
  • Up to 4 Km (2.5 mile) radio range with typical antennas.
  • Modbus data and control interface.
  • Flexible I/O configuration: combinations of 8 sensor inputs, 4 outputs to relays.
  • Flexible sensor inputs: voltage, current, pulse, RTD.